Pickling Paste, K - 2 Pickling Paste, Pickling Chemical, pickling passivation, Passivation Of Stainless Steel, Mumbai, India

WHY TO PICKLE AND PASSIVATE ON STAINLESS STEEL

Pickling passivation ensures corrosion resistance to components of stainless steel and thus considerably influences their life and usefulness.

Address :

G-2, Creative Industrial Estate, Plot No. 12, Next to H.P.Petrol Pump, N.M.Joshi Marg, Lower Parel, Mumbai - 400011. Maharashtra (INDIA)

Tel.: +91-22-2300 5205, 2309 7759
Fax.: +91-22-2309 9507

E-mail :

Also visit
weldcleaner.com stainlesssteelpassivation.net
picklingandpassivation.com

Pickling Paste

The chemical K-2 is available in 3 forms as follows giving the same results. Application of K-2 Passivation solution is a must after the application of all forms of K-2 chemical in order to avoid further corrosion and contamination
	It is used to clean weld seams and the areas surrounding the welds. HOW TO APPLY K - 2 PASTE 1. S1-56 - Degreaser (Removal of oil 50gm/lit.) Apply liquid S1-56 - Degreaser on to the surface for 5- 10 minutes. Then wash the surface thoroughly with water. 2. K-2 paste is to be applied on the weld seam and surrounding area with a brush. 3. Leave the K-2 paste on the weld seam for 15-45 minutes depending on the thickness of the oxide scale. 4. Scrub the surface with a plastic bristled brush and then wash surface thoroughly with water. 5. Apply K-2 passivation on the surface and leave it for 10 – 15 minutes. 6. Wash the surface thoroughly with water.